times-7-sport-sportscore

WheelTag Fitting Instructions

The WheelTag timing tag used with the WheelTime Sports system must be correctly attached to the front fork of your bike in order for your race time to be recorded. Instructions on how to attach the WheelTag are provided below or you can download  the instructions as a PDF for Left Hand Drive Countries (e.g. USA, Europe) or Right Hand Drive Countries (e.g. New Zealand, Australia).

Your WheelTag must be correctly attached to your bike in order for your time to be recorded.

Please install the latest flash player to view this video.

Step 1

  • Remove the backing tape on the back of black holder.
  • Position black holder 4 fingers below top of spokes on FRONT FORK.
  • Pull cable ties TIGHT. Ensure holder remains flush to fork.
  • If you are in a team event all members must have a black holder on their bike.


Step 2

  • Slide WheelTag into holder until it clicks.
  • Give tag a gentle tug to ensure WheelTag is secure.
  • To remove WheelTag, press release button and slide WheelTag out.

WheelTag correctly attached

  • Black holder secure
  • WheelTag secure
  • On front fork
  • Placed 4 fingers below top of spokes

Additional Instructions for Relay Team Members

Riders participating in a relay event will be issued with one WheelTag for the team, as well as a black holder for each team member. All relay team members must have a black WheelTag holder attached to their bike before the start of the race. At each relay interchange point the team WheelTag needs to be swapped to the bike of the cyclist riding the next section ("passing the baton"). To swap WheelTags do the following:

1. Press the round quick release button on the tag holder
2. Slide the WheelTag backwards out of the black tag holder
3. Slide the WheelTag into the holder of the cyclist riding the next section